Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3588925 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : 8165/ge/smb/t-92/2025-26 Provision Of 02 High Mast Lights At Mil Stn Samba |
| Last Date For Submission | 2nd Apr, 2026 |
| Opening Date | 04 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 19320.00 |
| Estimated Cost | 966000.00 |
| City | Samba |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply, laying and testing of XLPE electric power cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 25 sqmm, 3.5 core complete all as specified and directed. Note:- Earth work including excavation, returning filling, removing of soil, pipe for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule. | 125 | RM |
| 2 | All as per Item No 01 above but of size 16 Sq mm 4 core all as specified and directed. | 60 | RM |
| 3 | M & L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI earth galvanised iron strip of size 32 6mm and 40 mm dia bore light grade GI protection pipe for earth strip and GI watering pipe 20 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009 complete all as specified and directed (For High mast light 02 Nos = 04+ High mast light control panel = 04 = 08Nos | 8 | Each Set |
| 4 | Supplying, erecting, testing and commissioining , Raising & Lowering type minimum 15 mtrs hight high mast system hot dip galvanised inside and outside in single dip, with special latching arrangements suitable for wind velocity as per IS 875 part 3 with only one longitudinal seam weld per section but without circumferential weld including accessories viz head frame, 2 point suspension system with steel wire rope 6 mm dia 7/19 gauge, double drum winch, galvanised lantern carriage arrangement suitable or and with 9 lantern luminaires symetrically, lightning finial, LED aviation obsturction light with required wiring, lightning arrester spike and strips , foundation bolts, nuts, anchor plates, templates, trailling cable & integral power tool for raising and lowering operation of high mast with and including following technical specifications:- High mast system:- Height of mast - minimum 15 metres No of sections - Two Material of construction - S 355 grade as per BS-EN 10025 Base dia and top diameter (A/F) - 360 mm & 150 mm respectively. Plate thickness - Top -3 mm Bottom-4 mm Cross section of Mast - 20 side polygon Standard for of galvanisation - As per BS EN ISO 1461 Size of opening and door at base - 1050 mm x 225 mm Diameter of base plate - 520 mm Thickness of base plate - 25 mm Lightning protection finial - GI Single spike Maximum wind speed - 50 m/s as per IS: 875 (Part-III) Number of foundation bolts - 6 Nos PCD of foundation bolts - 445 mm Type/ diameter /length of foundation bolts- TS 600/24 mm dia/750 mm long | 2 | Each |
| 5 | Luminaires Carriage:- Material of construction - 50 NB ERW Class 'B' - MS Pipe Diameter of carriage ring (mm) - 535 mm (Internal dia) Consturction - 6 Arm, welded, 2 sections Load carrying capacity - 9 Luminaire. Winch / power tool_ Type/ SWL of winch - Double drum/350 kg Method of operation - Integral motor Motor capacity - 0.75 HP Three phase No of speeds - 6 pole, single speed Stainless steel wire rope Grade/ Construction- AISI 304, 7/19 constructino No of ropes - Two Diameter (mm) - 5 mm Braking load capacity - 1450 kg x 2 Feeder pillar box - Powder coated CRCA steel sheet feeder pillar housing 3.15 mm thickness minimum with MCCB 63 Amps four pole as incomer, timer 16 Amps, 230 volts Astro type and 40 amps contactor suitable for automatic switching ON and OFF of the luminiares, 9 Amps two contactor and raise lower push button for motor operation, incoming terminals of 50 sq mm and outgoing terminals of 16 sq mm for power cable and 2.5 sq mm for motor mounted on suitable foundation. (The rate incuded for earth work , PCC for erecting feeder pillar box) |
6 Days Left