Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4961821 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : 8166/ge/smb/t-43/2026-27 Provn Of Water And Electricity Connection In Otm Accn 02 High Mast Security Lights In Khetarpal Lines And Special Repair Replacement Of Ber Voltage Stabilizer At Ascon Node Dayalachak Under Ge Samba |
| Last Date For Submission | 12th Aug, 2026 |
| Opening Date | 14 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 50680.00 |
| Estimated Cost | 2534000.00 |
| City | Samba |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply, laying and testing of XLPE electric power cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured, (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 95 sqmm, 3.5 core complete all as specified and directed. Note:- There is no earth work the cable drawn inside HDPE pipe inside building. | 75.00 | RM |
| 2 | M & L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI earth galvanised iron strip of size 32 6mm and 40 mm dia bore light grade GI protection pipe for earth strip and GI watering pipe 20 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009 complete all as specified and directed. Note:- For LT Voltage stabilizer - 01 x 04 = 04 Nos For LT Panel - 05 panel x 02 Earthing = 10 Nos For High mast light - 02 Nos High mast light control panel - 02 Nos | 18.00 | Each Set |
| 3 | S & L HDPE pipe PN -10 of 100 mm bore for protection of LT cable | 50.00 | RM |
| 4 | Supply, Installation, Testing and commissioning of Servo Controlled Voltage stabilizer of capacity 100 KVA confirming to BIS 9815 (Part-I): 1994, reaffirmation 2019 latest version, Three phase, four wire (RYBN), 50 Hz, Naturally oil cooled, indoor, unbalanced type, copper wound, metallic body duly poweder coated with lifting hooks two nos, digital display, relay free smooth and silent operation with display type, relay free smooth and silent operation with 1st filling of Transformer oil up to level having following specifiaction:- (a) Capacity of Servo Voltage Stabilizer - 100 KVA. (b) Type - Suitable for unbalanced load and unbalanced input. (c ) Input voltage - 360 Volts to 480 Volts, Input frequency 50 HZ. (d) Output voltage - Stabilized at any designed/desired voltage 415 1% (e) Rated frequency - 50 Hz. (f) Wave form distortion -NIL. (g) Response time - not to exceed 20 Milliseconds. (h) Sensitivity - 1% (j) Rate of correction - Not less than 6 Volt/second between phase and netural. (k) Efficiency - more than 95 % (l) Type of load - Three phase, unbalnced type. (m) Metering - Digital display voltmeter / Ammeter with multifunction meter. (n) Operating temperature-For indoor use upto max ambient temperature + 55 C. (o) Dimmer rating - Min 140 Amps max 200 Amps. (p) Dimension of tanks - As per IS standard. (q) Oil capacity - As per IS standard and manufacturer recommendation. | 1.00 | Each |
| 5 | (r ) Class of Insulation - Class F (s) Mode of operation -Automatic /Manual (t) Winding Temperature rise - Max 55 C (10 C above operating temperature) (u) Transformer oil - IS 335 marked. (v) Core _ CRGO M4 Grade/GRNO (Cold Roll Grain oriented) (w) Auto Transformer (Variant) - 100 percent copper wound Electolyic Grade. (x ) Losses - As per IS Norms. (y) Power Factor - Not less than 0.99 (z) Protection :- (i) Over load protections. (ii) Short circuit protection (iii) High /low voltgae cut off (iv) By pass arrrangement faciltiy in case of emergency (v) Single phase sequence change /phase fail protection (vi) Earth fault protection (aa) Standard fitrting & Accessories e.g. Marking plate, lifting lugs, CI rollers, Earthing terminals etc cable box including first fill of oil included on the quoted rate. Note: (i) The new voltage stabilizer installed inside existing building, the necessary lifting arrangements i.e Hydraulic crane/lifter, transporting of 100 KVA servo stabilizer from factory to Dayalchak ASCON Node site that situated the hilly area near Dayalchak Sidi Gori Baba Mandir area including on the quoted rate. (ii) The rate included for disconnecting the existing cables and connections from BER Stabilizer and re connect with new stabilizer and checking load balance including on the quoted rate if extra cable requiered it will me measured and paid relevent item of schedule. |
6 Days Left