Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4077295 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Repair To Certain Road And Repair Replacement Of Road Furniture And Its Connected Items In Zone Ii And Zone Iii Under Ge Samba At Mil Stn Samba |
| Last Date For Submission | 14th May, 2026 |
| Opening Date | 21 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 3000000.00 |
| City | Samba |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Material and Labour for Preparation of existing black top surface of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surfaces by mechanical compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG 10 grade @ 5 Kg per 10Sqm of road surface and laying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) using binder (Bitumen VG-30 grade) contents @ 5.5 % by weight of total mix, mixed in Hot mix Plant and laid by using self propelled mechanical paver, rolled and compacted to required camber & gradient using 8 to 12 tonne power roller/tandem vibrating roller to achieve uniform smooth surface complete all as specified and directed. Note: (i) The combined grading of aggregate shall be as per Para 20.B.2.5.4(d) & 20.B.4 of SSR Part-I. (ii) Contractor shall quote his rates by considering binder content @5.5% of total mix by weight. However in case of any variation in weight of binder as per actual design mix, the same shall be paid by the contractor. | 610.00 | 10 Sqm |
| 2 | Material and Labour for Repair to potholes depth of potholes exc 30 mm, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat of paving bitumen (VG-10) @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), complete all as specified. Note : The patching of pot holes shall be as per para 20.A.34.2 of SSR Part-I | 2.00 | 10 Sqm |
| 3 | Supply and fixing in repair solar road stud having 3 LEDs of colours red/yellow to a side (total 6 Nos) housed in a tough pressure die casted aluminium alloy of any size (120x130mm) (100x130mm) and (125x125mm) of height 20mm with built in stem nail 30mmx50mm long for fixing with epoxy. LEDs, solar cells, battery & light sensor well protected inside under tough unbreakable polycarbonate transparent sheet roof system workable for 2-3 days (nights) after full charge for 8-10 hours complete all as specified and as directed | 100.00 | Each |
| 4 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed | 250.00 | Each |
| 5 | Supply and fixing in repair solar road stud delineator 3 LEDs of colours red/yellow to a side (total 6 Nos) housed in a plastic body. LEDs, solar cells, battery & light sensor well protected inside polycarbonate transparent sheet, device protected with power coated wire mesh cage. System mounted over 47mm dia steel tube powder coated of length 600mm having sheet foot for firm grip to ground. Delineator to have additional reflective bands. System workable for 2-3 days (nights) after full charge for 8-10 hours complete all as specified and as directed. | 50.00 | Each |
20 Days Left