| 1 | Supply, installing, testing and commissioning, factory made cubical type, LT feeder pillar box outdoor type, weather, vermin proof, cubical type, platform mounted, suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated bus bar of 3 Phase and Half neutral fashion, the panel should be dust proof and made with 3mm thick CRCA mild steel sheet with 50x50x6mm angle iron frame with necessary earth work excavation, hinged doors, front and rear opening and locking arrangement, Mild Steel Angle Iron Frame above the Normal Ground and duly powder coated on the out side and inside, complete all as specified and directed including following accessories
(a) Aluminium bas bar 400 amps set of 3 phase and half neutral, supported with suitable size of heavy duty porcelain gland lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral.
b) MCCB 250 amps, 415 volt, 36 KA Breaking capacity 4 pole electromagnetic release type duly connected to Bus Bar.
Note: All incoming and out going cables are to be connected to the above panel with proper lugs, glands nuts, bolts etc. The cost earth work, PCC foundation work is deemed to be included in the above item. | 5.00 | Job |
| 2 | Supply, installing, testing and commissioning, factory made cubical type, LT feeder pillar box outdoor type, weather, vermin proof, cubical type, platform mounted, suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated bus bar of 3 Phase and Half neutral fashion, the panel should be dust proof and made with 3mm thick CRCA mild steel sheet with 50x50x6mm angle iron frame with necessary earth work excavation, hinged doors, front and rear opening and locking arrangement, Mild Steel Angle Iron Frame above the Normal Ground and duly powder coated on the out side and inside, complete all as specified and directed including following accessories
(a) Aluminium bas bar 400 amps set of 3 phase and half neutral, supported with suitable size of heavy duty porcelain gland lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral.
b) MCCB 160 amps, 415 volt, 36 KA Breaking capacity 4 pole electromagnetic release type duly connected to Bus Bar. Note: All incoming and out going cables are to be connected to the above panel with proper lugs, glands nuts, bolts etc. The cost earth work, PCC foundation work is deemed to be included in the above item. | 4.00 | Each Job |
| 3 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sq mm 4 core | 1560.00 | RM |
| 4 | All as per item no 3.00 above but 3.5 Core 240 Sqmm | 250.00 | RM |
| 5 | All as per item no 3.00 above but 3.5 Core 185 Sqmm | 550.00 | RM |
