Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4654721 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair / Maintenance Of Earthing At Various Location At Hq Eac (u) Af Under Ge (i) Af Shillong |
| Last Date For Submission | 15th Jul, 2026 |
| Opening Date | 17 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 40000.00 |
| Estimated Cost | 2000000.00 |
| City | Shillong |
|---|---|
| State | Meghalaya |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Excavation in trenches not exc. 1.5 m wide not exc. 1.5 m in depth; for laying of cables not exc. 10 Sqm on plan and getting out , trimming sides, forming bottom surface to required level complete in hard/dense soil all as specified and as directed. | 15.00 | Cum |
| 2 | Excavating in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr in depth but not exceeding 3.0 mtr depth ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out soft/loose soil complete all as specified. | 5.00 | Cum |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick as in soils all as specified and as directed. | 18.00 | Cum |
| 4 | Removing of excavated soil to a distance not exc. 50m and depositing where directed at a level n.exc 1.5m above starting point all as specified and as directed. | 2.00 | Cum |
| 5 | Material and labour for earthing with copper earth plate electrode 60 cm X 60 cm X 3.15 mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 20 mm x 3 mm thick copper strip protected by 40 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the copper plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 8mm MS rod for handle including painting with synthetic enamel paint of approved colour and put number marked with GI plate above 45 cm from ground level as per colour code in AF station, necessary excavation and earth wok in soft/loose soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I including taking out old earthing all as specified. Note: (i) The cost of earth lead /strip and GI pipe for protection of earth lead/strip upto 7.5m is included in the quoted rate. (ii) The cost of excavation, earth work is included in the quoted rate. (iii) The ohmic value shall no be more than 03 ohm. (iv) If the resistivity of the soil not achieved the required ohmic value as per above. The Contractor shall arranged further grids to achieve necessary ohmic value. No extra payment shall be made for additional grids and for testing of soil for getting the ohmic value. (d) During payment of RAR/ Final Bill the contractor shall submit necessary report of ohmic value for each location duly signied by Contractor, JE and Engineer-In-Charge. | 14.00 | Each Job |
6 Days Left