Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3978988 |
|---|---|
| Organisation Name | Bus Stands Management And Development Authority |
| Tender Brief | Corrigendum : Special Repair To R.m Office Building At Hrtc Workshop Rohroo Distt. Shimla Hp |
| Last Date For Submission | 5th May, 2026 |
| Opening Date | 05 May, 2026 |
| Document Cost | 590.00 |
|---|---|
| EMD | 31700.00 |
| Estimated Cost | 1612337.00 |
| City | Shimla |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. | 9483.01 | Per Kilogram |
| 2 | Steel work welded in built up sections/ framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. | 2885.98 | Per Kilogram |
| 3 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 (One hundred twenty) grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 (Five to Seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (Fifteen to Eighteen) microns. Sheet should have protective guard film of 25 (Twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 (Twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) (Five point five into Fifty five milimeter) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. | 230.85 | Per Square Meter |
| 4 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 (One hundred twenty) grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 (Five to Seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (Fifteen to Eighteen) microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)(Five hundred to Six hundred milimeter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. | 46.80 | Per Meter |
| 5 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm (One point sixty six milimeter to Two milimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge(Base members of steel work shall be measured & paid separtely), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. | 26.46 | Per Square Meter |
2 Days Left