Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4449175 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Smart Periodical Services And Certain Repair Works In Mh Shimla Sanjauli Under Ge (i) Jutogh |
| Last Date For Submission | 18th Jun, 2026 |
| Opening Date | 20 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 70000.00 |
| Estimated Cost | 3500000.00 |
| City | Shimla |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking down cement plaster on brick/ stone/ concrete wall surface in any position complete all as specified and directed. | 1500.00 | Sqm |
| 2 | M&L for rendering 15mm thick on fair faces of brick or concrete surface in CM 1:4 finished even and fair with water proofing compound (External surface), complete all as specified and directed. | 1500.00 | Sqm |
| 3 | M&L for granules textured homogeneous wall finishing system consisting of a two component system of dry granules (25 Kgs pack) made of 92% silica particles coated with fade resistant pigments, 100% acrylic polymer bounding agent (5 Kgs pack) with the applied thickness of the coating being between 0.8mm-1.2mm to be applied on cured, smooth level plastered surface as per manufacturer's directions, applied by approved applicator of the manufacturer's as per the directions/ supervision of the Engineer-in-Charge. The above textured coating should confirm to surface spread of flame class one of BS 476: Part-07: 1971 and pull off strength of the coating to meet JISA 6909, complete all as specified and as per manufacturer's specifications/ instructions. Make: Bakelite Hylam Limited or equivalent as approved. | 1500.00 | Sqm |
| 4 | M&L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ liter as per the LEEDS specifications, Anti Algae properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. | 10090.00 | Sqm |
| 5 | Notes: (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter (on Non Judicial Stamp paper of Rs. 100/- as specified) with any one of manufacturer and also with their authorized applicator mentioned in the tender along with their bid in Cover-I failing which his bid will be rejected. Authorized applicator shall have valid authorization letter from the manufacturer (Minimum regional HQs) and shall have been issued not earlier than 30 days from the bid submission start date. The authorization letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. |
18 Days Left