Complete Tender Details

Empowering Indian businesses in the procurement ecosystem since 2012

Tendering Authority: Airports Authority Of India
Tender ID4035687
Organisation NameAirports Authority Of India
Tender BriefDevelopment Of Solapur Airport. Sh Provision Of Power Supply To Watch Tower And Provision Of Additional Standby Feeder For Papi Units
Last Date For Submission11th May, 2026
Opening Date13 May, 2026
Cost
Document Cost1180.00
EMD311385.00
Estimated Cost10379501.00
Location
CitySolapur
StateMaharashtra

Register to see full details

BOQ Items
#ItemQtyUnits
1Design, manufacture and Supply of indoor compartmentalized type LT panel 36 kA short circuit breaking capacity panel of suitable size bus bars with SMC/DMC supports made of 2mm CRCA sheet totally enclosed,IP-42,free standing floor/ wall mounting,powder coated painting suitable to operation on 3 phase and neutral,415V,50Hz AC system with bus bars G.I flat Earth strip on both sides, Removeable gland plates at bottom with suitable size of predrilled holes for cabels,cable interconnections,wiring earthing,rotary handles & spreader links to all MCCBs,powder coated painting etc,with following items and installation on suitable channels / elevated concrete foundation as per site requirement/directions of E-I-C. INCOMER (a) 200 A, 4P MCCB, Microprocessor based release (lcs = Icu = 36kA) with inbuilt O/L , S/C & E/F protection, shunt trip, auxiliary contacts - 2 Nos (b) R, Y, B phase indicating LED lamps with 2 amp back up MCB - 2 Set (c) Digital Mulit functional meter suitable range for 3 phase 4 wire with LED display and selector switch along with MCB of suitable ratings - 02 sets for 3 phase 4 wire with LED display and selector switch and cast resin CT ratio progragmmable and auto ranging along with 3 numbers of class 1.0,15VA suitable range CTs-02 Sets. (d) ON, OFF, TRIP Indicating LED Lamps With 2 Amp MCB - 2 Set MANUAL CHANGE OVER SWITCH One set of four pole 200 Amps, 36 KA capacity BUSBAR One set of 400 Amps TPN Aluminium Busbar of 36 KA capacity OUTGOING a) 63 A, 4P MCCB with built in Microprocessor based release with adjustable thermal setting (lcs = Icu =36 KA) - 01 Nos. (b) 100 A, 4P MCCB with built in Microprocessor based release with adjustable thermal setting (lcs = Icu =36 KA) - 03 Nos. 1.000job
2Design, manufacture and supplyof outdoor compartmentalized type feeder pillar 36 kA short circuit breaking capacity panel of suitable size bus bars with SMC/DMC supports made of 2mm CRCA sheet totally enclosed,IP-65,free standing floor/ wall mounting,powder coated painting suitable to the existing space,operation on 3 phase and neutral,415V,50Hz AC system with bus bars G.I flat Earth strip on both sides, Removeable gland plates at bottom with suitable size of predrilled holes for cabels,cable interconnections,wiring earthing,rotary handles & spreader links to all MCCBs,powder coated painting etc,with following items and installation on suitable channels / elevated concrete foundation as per site requirement/directions of E-I-C. INCOMER (a) 100 A, 4P MCCB, Microprocessor based release (lcs = Icu = 36kA) with inbuilt O/L , S/C & E/F protection, shunt trip, auxiliary contacts - 2 Nos (b) R, Y, B phase indicating LED lamps with 2 amp back up MCB - 2 Set (c) Digital Mulit functional meter suitable range for 3 phase 4 wire with LED display and selector switch along with MCB of suitable ratings - 01 sets for 3 phase 4 wire with LED display and selector switch and cast resin CT ratio progragmmable and auto ranging along with 3 numbers of class 1.0,15VA suitable range CTs-02 Sets. (d) ON, OFF, TRIP Indicating LED Lamps With 2 Amp MCB - 2 Set BUSBAR One set of 200 Amps TPN Aluminium Busbar of 36 KA capacity OUTGOING . (a) 32Amps, 4P power contractor with 230 volts 50 HZ contrctor coil connected through 24 hour timer for perimeter lighting - 01 set. b) 01 no. 6 way horizontal TPN DB consisist of 03 no.10 Amps TPN MCB, 01 no. 6 Amps SPN MCB, 7.000job
3Installation Testing and commissioning of Indoor type LT panel on existing cable trench by provinfing suitable MS channels/Angles including cutting, welding, grinding and painting as per site requirement / directions of E-I-C.1.000job
4installation,testing and commisioning of outdoor type feederpillar by provinfing suitable MS channels/Angles including cutting, welding, grinding and painting / elevated concrete foundation as per site requirement/directions of E-I-C.7.000job
5Supply of following size of XLPE insulated & PVC sheathed, armoured, aluminium conductor under ground cable of 1.1KV grade as per IS 7098:1988 Part-I with upto date amendments complete as required. 2C x 6 Sq.mm150.000Meter
11th May, 2026

23 Days Left

WhatsApp