Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4828087 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Construction Of 03 No. Of Borewells At Muftibagh Gandtal And Barji In District Srinagar. |
| Last Date For Submission | 23rd Jul, 2026 |
| Opening Date | 24 Jul, 2026 |
| Document Cost | 200.00 |
|---|---|
| EMD | 18200.00 |
| Estimated Cost | 603000.00 |
| City | Srinagar |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125 mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I) with up-to-date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by all available mechanical attachments (ODEX/DTH/Air Rotary) and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. | 120.00 | Mtr |
| 2 | Supply, Providing, Fitting, assembling in vertical position in above drilled bore of Mild Steel plain and beveled ended 125mm dia. (Class B) as per IS 4270 Casing pipes and subsequent lowering of casing assembly and its welding after every 10 feet, up to the drilled/desired depth. The whole casing pipe is inclusive of slotted pipe/ flushed, which is to be used as per the site requirement and as directed by site engineer. The pipe shall be lowered up to the desired level BGL. The average length of each pipe shall not exceed 3.00 Mts. The welding electrodes used for welding the pipe shall confirm to relevant IS codes. The specifications of the tube well shall be as per IS 2800 part I&II | 120.00 | Mtr |
| 3 | Supply, Installation, Testing and commissioning of INDIA Mark II hand pump assembly comprising of cylinder, head, handle assembly, front cover, handle, axle, washers, nuts/bolts. | 2.00 | Job |
| 4 | Providing and fitting of 32mm dia: G.I Riser Pipe (Class - B) of approved ISI make including properly threaded after 10 feet length each number with heavy duty sockets forjoint fitting in the tube well. | 18.00 | Nos. |
| 5 | Providing and fitting of 10 feet long G.I. connecting rods, suitable for INDIA mark II Hand pump. | 18.00 | Nos. |
19 Days Left