Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3775539 |
|---|---|
| Organisation Name | Shri Amarnathji Shrine Board |
| Tender Brief | Corrigendum : Repair To Outsourced Huts At Baltal (33-64). |
| Last Date For Submission | 30th Mar, 2026 |
| Opening Date | 31 Mar, 2026 |
| Document Cost | 944.00 |
|---|---|
| EMD | 16000.00 |
| Estimated Cost | 800000.00 |
| City | Srinagar |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. (subject to actual measurement at site) | 15 | Nos |
| 2 | Dismantling of CGI roofing sheets Huts pre Yatra including stacking at SASB store.(subject to actual measurement at site) | 500 | sqm |
| 3 | Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm+/-5% total coated thickness (TCT), Zinc coating 120 gsm as per IS:277 in 240 mpa stee grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(subject to actual measurement at site) | 500 | sqm |
| 4 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) (subject to actual measurement at site) | 100 | meter |
| 5 | Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)(subject to actual measurement at site) | 10 | sqm |
2 Days Left