Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4491285 |
|---|---|
| Organisation Name | Power Development Department |
| Tender Brief | Corrigendum : Supply, Installation, Testing And Commissioning Of Ct/pt Unit Along With Ht Bidirectional Meter For 630 Kva Dedicated Dt Of Sps Museum , Srinagar |
| Last Date For Submission | 30th Jun, 2026 |
| Opening Date | 02 Jul, 2026 |
| Document Cost | 200.00 |
|---|---|
| EMD | 3940.00 |
| Estimated Cost | 197000.00 |
| City | Srinagar |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply, Installation, Testing and commissioning of CT/PT unit along with HT bidirectional Meter for 630 KVA dedicated DT of SPS Museum , srinagar | ||
| 2 | Loading, unloading,carriage,insurance,Supply,installation,testing and commisioning of below mentioned items of the BOQ | ||
| 3 | 11kV Pilfer resistant metering cubicle for 3phase 4 wire metering system made of MS Sheet steel thickness not less than 2mm duly power coat painted suitable for indoor as well as outdoor as per the site requirement. The cubicle shall be painted through 7-tank process. The External dimensions should be adequate. Panel having two compartments upper Meter compartment and lower CT/PT compartment. Provided with synthetic or semi synthetic gasket firmly glued to the sufrace, Dust, weather and Vermin proof and shall comply degree of protection IP 65 both the chambers having one sided hinged door arrangments. The metering panel shall be provided with two No G.I channels of size 100 x 50 mm on the front and rear sides duly welded and 4 No of lifting hooks. It should be possible to take meter reading manually, through CMRI and computer without opening the LV chamber door. | 1.00 | Job |
| 4 | A)Single Phase, Single core, single ratio, Epoxy resin Cast Current Transformers suitable for 11kV, copper wound primary type with rated burden 5VA and accuracy class 0.5 or better and conforming to IS2705 (part-I & II) amended upto date. ISF shall be upto 5. The CT ratio shall be as 15/5 or 20/5 or 25/5 or 50/50 or 75/5 as per requirement to be verfied by concerned sub-Division. B)11kV/ 110 V, Three phase epoxy resin cast PT with rated burden 15VA per phase and accuracy class 0.5 or better and conforming to IS:3156 (part-I&II) amended upto date with proper colour coded identification. PTs shall be of uniform insulating and withstand separate source 23kV pf for one minute. | 1.00 | Job |
| 5 | Bus Bar details: A)CTs bus bar:- 40x6 mm copper strip or adequate size PTs bus bar: Copper wire 8 SWG or 30x0.6mm copper flat strip to connect PT terminal or adequate size duly insulated by the monoplast tape B)PVC Copper wire flexible multi-strand of required size for secondary connections for CT wiring the minimum wire size shall be 4 mm (RYB) and for PT wiring minimum wire size shall be 2.5 mm (RYB). C)Copper Lugs preferably ring type duly crimped for termination of wires and tapes D)Grounding bus of minimum 40mm copper, 25cm long fixed to the unit in HV chamber. The CTs, PT meter and 11kV Cable sheath shall be grounded to the bus through grounding wire (green) of min size 10mm | 1.00 | Job |
6 Days Left