Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4526994 |
|---|---|
| Organisation Name | Housing And Urban Development Department |
| Tender Brief | Corrigendum : Supply, Installation, Testing and Commissioning Of 05 Cusec Submersible Pumping Unit Along With Chain Pulley Block And Allied Works At Ips Boulevard And 100 Kva D.g. Set And Other Allied Works At Dewatering Station Baghwanpora And Pumping Unit At Daulatabad |
| Last Date For Submission | 29th Jun, 2026 |
| Opening Date | 29 Jun, 2026 |
| Document Cost | 1500.00 |
|---|---|
| EMD | 100000.00 |
| Estimated Cost | 5000000.00 |
| City | Srinagar |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | (A) IPS Boulevard: Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable (Power cable, control cable, instrumentation cable each 100-meter length), ultrasonic level transmitter, soft starter panels, duck foot pedestal etc Type of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity=583.33 M3/Hr Head=12 meters or above Motor rating = 50-60 H.P 1450 rpm Make (Kirloskar/Xylum /Granfoss/Equivalent) | 1.00 | Job |
| 2 | Supply, installation, fitting, testing and commissioning of under running, outdoor type monorail electric hoist of 3 TON capacity and lift of 8 M capable of travelling across (Right & left) and lifting and lowering (Up & Down) movement. The technical speciation of the EOT is as under Duty Or Class of hoist: Electric hoist, under running, outdoor type with continuous operation. Capacity=3-ton Lift of Hoist=8M Specification IS3177 (1999):IS800(1976) Motor: Electric hoist, under running, outdoor type with continuous operation Hoist Speed: - 4 m/min (Max.) Control/operation of electrical hoist Pendent station control to be operated from MFL (approx. 12 Feet vertical height) complete with control panel Wire Rope manufacturing and testing: -As per ASTM A 1023M-02 and ASTM A586 Number of Falls: 4 or higher Wire rope diameter: As per IS code Tensile strength: 1770 N/mm (minimum) Rope Drum: un-flanged Material: seamless pipe Drum dia : As per IS code Drum Length: As per requirement Type of bearing: -SA spherical roller/ball bearing Hooks: Type Plane C Shank Swiveling: Yes, On Thrust Bearing Safety latches: To be Provided Designed: According to DIN-15400 Type of Brakes: Electro hydraulic thrust or electromagnetic disc type Limit Switch: Rotary The hoist system shall be complete in every respect and shall be tested on load at site. The job includes Providing /erection of structural supports, cross members etc for erection of EOT crane. Make(Induff/Pull lift/equivalent) Note: -The equipment shall be provided with company test certificate | 1.00 | Job |
| 3 | Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The mats shall be as per IS 15652:2006 & shall have the following specifications: - Composition: Rubber (synthetic mats for electrical purpose) Thickness: - 4mm Size: - 1M wide. The rubber mats shall be accepted with manufacturers test certificate. | 18.00 | Mtr |
| 4 | (B) IPS Daulatabad: Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable ( Power cable, control cable, instrumentation cable each 100 meter length) ,ultrasonic level transmitter(0-10 Mtr),soft starter panel, duck foot pedestal etc Type of pump: Non clog centrifugal volute type sewage submersible Pumps Type of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity= 210 M3/Hr Head = 12 meters or above Motor rating = 20 H.P 1450 rpm Make (Kirloskar/Xylum /Granfoss/Equivalent) | 1.00 | Job |
| 5 | Providing fitting and testing of MS pipe 150 mm dia 6.4 mm thickness. The job includes P/F of MS bends, fab for the delivery manifold up to rising main including easy bends, flanges, rubber gaskets nut and bolts etc for successful execution of work at site | 10.00 | Mtr |
8 Days Left