Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4968741 |
|---|---|
| Organisation Name | Irrigation And Flood Control Department |
| Tender Brief | Corrigendum : Supply, Installation, Testing And Commissioning Of Different Pumping Unit For Lift Irrigation Schemes In Different Areas Of District Srinagar. |
| Last Date For Submission | 8th Aug, 2026 |
| Opening Date | 10 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 120000.00 |
| Estimated Cost | 6000000.00 |
| City | Srinagar |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | PART A: Design, Manufacture, Supply, Installation, Testing and Commissioning Of 10 Cusec Capacity Horizontal Pumping Unit With 15 Meter Dynamic Head and allied Electrical & mechanical equipment For Lift Irrigation Scheme Bakshipora Kernabal of MISD Headquarter. Manufacture, Supply, Installation, testing and commissioning of 10 Cusec Horizontal Split Casing pumping unit as per following specification for Lift Irrigation Scheme Bakshipora Kernabal. As per specifications mentioned in Annexure A, S. No. 01 | 1.000 | Job |
| 2 | Supply, installation, testing and commissioning of CI NRV of 300 mm of pressure ration PN 1.0 as per IS 5312(Part 1):2004 with latest amendments and flange connections as per IS 1538. (Make: Kirloskar/ VAG/as per EOI/ Substantially equivalent) including fabrication of bypass arrangement for 300 mm dia NRV as under: Creating holes of 50 mm using gas cutter. Providing and fitting of 50 mm dia steel pipe heavy class of required length along with 2 No elbows. Providing and fitting of 01 No SS Ball valve 50 mm of reputed make. The job also includes providing, welding & fitting of 300mm ND Flanges of matching Pitch and thickness with NRV. The job also includes proving, welding and fitting of 300 mm ND flange of matching pitch and thickness to pump discharge. | 2.000 | Job |
| 3 | Providing fitting, installation and testing of New priming pump set of size 65mm x 50 mm to be connected to 02 Number horizontal type pumping equipment at site. The priming pump set shall be of reputed ISI mark. The priming pump shall be Monoblock type mounted on channel Iron common base frame. The capacity of the pumping equipment shall be as per requirement at site and the prime mover rating shall be of 5 HP. The speed of the pumping equipment shall be 2880 RPM (Max.). The priming pump shall be installed at foundation block which shall be laid in proper grading all the material required for the foundation block shall be arranged at site. As per specifications mentioned in Annexure A, S. No. 03 | 1.000 | Job |
| 4 | Fabrication, providing, installation, testing & commissioning of Mild steel pipe of 300 mm nominal dia. with 6 mm wall thickness to be laid as suction/delivery pipe at. The pipes shall be end to end welded to each other in two circumferential runs to provide a complete leakproof arrangement. The offsets in the scope of laying the pipe are covered in the job. The job includes proper laying of pipe as per: i. Nominal dia. = 300mm ii. Wall thickness = 6 mm iii. Quality of Mild steel to be used for manufacture of pipes = As per BIS-226 Or BIS - 2026 iv. Type of welding = ERW v. Pipe to be manufactured as per BIS-3589-1981 vi. Maximum circumferential joints in each pipe length = 2-3 | 20.000 | Mtr. |
| 5 | Fabrication, providing & installation of 300mm dia. Mild steel long Bend to be welded to rising main where ever required. The bend shall be fabricated out of 6 mm thick M.S pipe. i. Nominal dia. = 300mm ii. Wall thickness = 6 mm iii. Quality of Mild steel to be used for manufacture of pipes = As per BIS-226 Or BIS - 2026 iv. Type of welding = ERW v. Pipe to be manufactured as per BIS-3589-1981 vi. Maximum circumferential joints in each pipe length = 2-3 | 1.000 | Job |
2 Days Left