Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4247840 |
|---|---|
| Organisation Name | Airports Authority Of India |
| Tender Brief | Design, Fabrication And Supply, Installation, Testing and Commissioning Of Motorized Sliding Trolley Gate Including All Inclusive Comprehensive Maintenance Contract At Srinagar International Airpor |
| Last Date For Submission | 1st Jun, 2026 |
| Opening Date | 03 Jun, 2026 |
| Document Cost | 1180.00 |
|---|---|
| EMD | 579299.00 |
| Estimated Cost | 19309971.00 |
| City | Srinagar |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | SH-I: Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate. | ||
| 2 | Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate having length approx. 130 Meters and 2.50 mtr. height from Finished Floor Level including Wheel Height suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed specifications and drawings including carrying out required fabrication works complete as required. Horizontal Base Frame of trolley gate shall be made of MS Pipe section of Size 100mm x 100 mm of 3mm thickness & Vertical frames shall be made of MS Pipe section of size 50mm x 50mm x 5 mm with side supports of suitable size M.S. Angle / Tube & 'U' shaped clamp/frame on top for concertina coils. Items also includes painting of gate with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer complete etc. as required. | 1 | Job |
| 3 | Design, Fabrication, Supply, Installation, Testing and Commissioning of Single part opening M. S. Sliding Trolley Gate having length approx. 110 Meters (to be fabricated in two section with movement on single track and closing length of two sections with available space is maximum 60 Mtrs) only 2.50 mtr. height from Finished Floor Level including Wheel Height suitable for movement on M. S. Angle Track fixed on M. S. U channels as per the enclosed specifications and drawings including carrying out required fabrication works complete as required. Horizontal Base Frame of trolley gate shall be made of MS Pipe section of Size 100mm x 100 mm of 3mm thickness & Vertical frames shall be made of MS Pipe section of size 50mm x 50mm x 5 mm with side supports of suitable size M.S. Angle / Tube & 'U' shaped clamp/frame on top for concertina coils. Items also includes painting of gate with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer complete etc. as required. | 1 | Job |
| 4 | Supply, fabrication, Installation, testing & Commissioning of Wiremesh of size 35mm x 35mm of 3mm dia wire with 25mm X 25mm X 3mm M.S. Angle frame in vertical and cross sections frames throughout the above M.S Sliding Trolley Gate as per specifications including painting with synthetic enamel paint of approved colour & make by applying 2 or more coats and one or more coat of red oxide Primer etc. complete as required. | 710 | Sq. Mtrs |
| 5 | Supply, Installation, Testing & Commissioning of suitable size (not exceeding 300mm) M. S. wheels set( 2 nos. wheels per set) with robust shaft and blocks for less noise operation alongwith pillow block bearing units of reputed make and all associated accessories, works and painting etc. complete as required. | 78 | Set |
20 Days Left