Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4277462 |
|---|---|
| Organisation Name | Mahanadi Coalfields Limited |
| Tender Brief | Corrigendum : Water Pipe Line Arrangement To Each Earthpit, Providing Shed To Capacitor Bank And Arrangement Of Sand Bucket Stand For North Quarry Substation Of Bharatpur Ocp, Ba |
| Last Date For Submission | 29th May, 2026 |
| Opening Date | 01 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 5500.00 |
| Estimated Cost | 435922.00 |
| City | Talcher |
|---|---|
| State | Odisha |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work15 mm dia nominal bore | 160 | Mtr |
| 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm dia nominal bore | 120 | Mtr |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 40 mm dia nominal bore | 100 | Mtr |
| 4 | 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) for repairing the existing foundation and cable trench. | 165 | Sqm |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 35 | Sqm |
2 Days Left