Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4247379 |
|---|---|
| Organisation Name | Pradhan Mantri Gram Sadak Yojana |
| Tender Brief | T-10 Chafekhol Masure Malgoan Road |
| Last Date For Submission | 18th May, 2026 |
| Opening Date | 19 May, 2026 |
| Document Cost | 5900.00 |
|---|---|
| EMD | 59398.00 |
| Estimated Cost | 5939791.00 |
| City | Thane |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | 1.00 Reneval BT surface and DLP maintaince (6 to 10 years) to Kunkavale Chafekhol Malgaon Masure Road Km 0/0 to 3/0 and 6/00 to 7/220 ( 4.22 km )Tal :- Malvan Dist :- Sindhudurg | ||
| 2 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 | 486.00 | One Cubic Meter |
| 3 | Modified Penetration Macadam Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification | 4508.44 | One Square Meter |
| 4 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 20974.47 | One Square Meter |
| 5 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508..(excluding seal coat)(Waste Plastic) | 16466.03 | One Square Meter |
6 Days Left