Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4986354 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Providing Internal And External Electrification Arrangements Including Cold Storage Unit To The Construction Of Cold Storage Unit Of 24 Bodies In Thanjavur Medical College Hospital At Thanjavur In Thanjavur District (second Call) |
| Last Date For Submission | 5th Aug, 2026 |
| Opening Date | 06 Aug, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 31400.00 |
| Estimated Cost | 4265000.00 |
| City | Thanjavur |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | 6 Body cold Storage Supply, erection, testing, commissioning and handing over of 6 bodies Mortuary Cabinet Type as detailed Below (A) Supply, fabrication of one number 60 mm, pre-tab Modular PUF insulated cabinet type mortuary to hold 6 bodies in 2-tier arrangement with Telescopic S.S trays as per the following specification and provisions. 1) External cabinet dimensions of suitable size for bodies cabinet with panel thickness not less than 60mm. 2) Insulation with 60mm thick PUF panel with 35 to 40 KG/cumt. 3) Panel finish 0.5mm thick stainless steel with in the front side outer and other outer inner areas with 0.5mm thick pre-painted galvanized steel. 4) Individual doors for each body with chrome plated hinges and locks. 5) All panels to be joined together by means of tongue and groove and locked together means of cam locks on each side to ensure air tightness foamed in PVC bubble gasket in all panels 6) 'L' shaped corner panels in a single piece in all four corners. | 4.000 | Nos |
| 2 | 7) Edge of the door and door openings to be finished with PVC lining. 8) Electronic temperature, indicator cum controller, vapour proof incandescent light fixture with lamp with plastic coated globe. 9) Pilot light to alert the personnel on the out side of the cobinet. 10) Toggle switches to operate the vapour proof light and pilot light mounted on the cabinet with stainless cover plate protection. B) Supply, fabrication and erection of one number split mounted type roof top mounted refrigeration system to maintain +2 deg C to +6 deg C inside the 6 body Mortuary cabinet with the following specifications of capacity not less than 10000 BTU/HR x 1 nos Constructed of GI Panels with compressor, condenser with condenser coil, evaporator with evaporator fan motor with suction, discharge and liquid refrigerant piping and expansion device etc., Operating on with power supply at 230V+/-10%/single phase/50Hz AC supply. c) Supply, fabrication and erection of 6 Nos, of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold 120 kgs of weight when it is stretched fully out. D) Supply, fabrication and fixing of 6 numbers of stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet. E) Providing 2" thick raised concrete platform of suitable size to keep the above mortuary cabinet. E) Providing drainage piping from the evaporator and cabinet to lead drain water just outside the cabinet room. 11) Including Packing and Forwarding Charges. | ||
| 3 | Supply of 5 KVA Electronic Automatic Voltage Stabilizer with High and Low Voltage cut off and 3 minutes time delay relay with demonstration. | 4.000 | Nos |
| 4 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) | 29.000 | Pts |
| 5 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. | 18.000 | Nos |
4 Days Left