Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4076386 |
|---|---|
| Organisation Name | Kerala State Nirmithi Kendra |
| Tender Brief | This Estimate Include Providing And Fixing Aluminium Work For Door Window Ventilators And Partitions Providing And Fixing Glazing In Aluminium Door Window Ventilator Shutters And Partitions Etc. With Epdm Rubber Neoprene Gasket Etc Designing |
| Last Date For Submission | 29th Apr, 2026 |
| Opening Date | 02 May, 2026 |
| Document Cost | 1474.00 |
|---|---|
| EMD | 18423.00 |
| Estimated Cost | 736925.00 |
| City | Thodupuzha |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | CHC VANDANMEDU- LAB PARTITION WORK | ||
| 2 | 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge.( Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 440.000 | kg |
| 3 | 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 56.690 | sqm |
| 4 | OD328790/2025-2026 Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening | 80.200 | sqm |
| 5 | OD328932/2025-2026 Supplying office chair(high back) | 4.000 | each |
5 Days Left