Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4952850 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Periodical Services And Miscellaneous Repairs In Zone-i,ii And Zone-vi Of Various Units At Lekhapani Mil Stn Under Ge Dinjan No.2 |
| Last Date For Submission | 4th Aug, 2026 |
| Opening Date | 06 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 70000.00 |
| Estimated Cost | 3500000.00 |
| City | Tinsukia |
|---|---|
| State | Assam |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed. | 250.00 | Sqm |
| 2 | M&L for rendering 15mm thick in CM 1:4 in brick/concrete surfaces up to 8 Mtr height of building, finished even and smooth without using extra cement with and including using liquid WPC @ 200ml per 50 kg of cement all as specified and directed (WPC shall be measured and paid separately) | 100.00 | Sqm |
| 3 | Supply only Liquid water proofing compound, complete all as specified. | 3.00 | Ltr |
| 4 | Complete removal of existing treatment on wall/ roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc by skilled labour complete all as specified and as directed | 5750.00 | Sqm |
| 5 | M & L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr of average thickness 1mm over the newly plastered surfaces to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanicsm) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per following steps : - Step 1 : Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a max pressure 3300 PSI Step 3 : Allow 6-8 hrs time to dry the putty surface Note : (a) The work pertaining to periodical services and water proofing shall be executed as per manufacturer instructions i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by Engr-in-Charge. (b) Cost of Scafolding upto 10 mtr height of building is included in this item. (c) Masking of waindow/doors during spray painting using polythine film will be included (d) Cleaning and clearing site of paint, mats etc included. | 150.00 | Sqm |
6 Days Left