Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4136537 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : 8625 Provision Of Standby Diesel Generator Set 40 Kva And Special Repair For Replacement Of Ber Summer Appliances And Water Supply Equipments At Ins Kattabomman Under Ge Tirunelveli |
| Last Date For Submission | 27th May, 2026 |
| Opening Date | 29 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 59000.00 |
| Estimated Cost | 2950000.00 |
| City | Tirunelveli |
|---|---|
| State | Tamil Nadu |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply, installation, testing and commissioning of silent diesel Engine driven generating set 415 volts, 3 phase 4 wire engine of capacity 40 KVA as per IS: 10001/10002 and Alternator as per IS: 13364 complete with standard control panel, meter and sound proof canopy as per CPCB Norms-IV and foundation for DG Set and AMF Panel etc relay panel and switch gears for automatic starting on main failure of 40 KVA made out of 3.15 mm thick CRCA sheet outdoor type with vermin proof powder coated painting all as specified and directed by Engr-in-Charge. NOTE FOR DG : A). DIESEL ENGINE : Diesel Engine rated 1500 rpm. Radiator Cooled Engine with CRDi System four stroke and three cylinder conforming to BS 5514/ ISO 3046. (i) Electrical starter motor 12V DC (ii) Battery charging alternator (iii) Electronic Governor (iv) Spin-on fuel filter (v) Spin-on full flow lube oil filter (vi) Residential Silencer (vii) Air Cleaner (paper element type) (viii) Recovery bottle (ix) Safety for LLOP/ HWT (x) Flywheel & Flywheel housing (xi) First Fill to lube oil and coolant | 1.00 | Each |
| 2 | B). ALTERNATOR : Synchronous Alternator of 40 KVA of 'H' class insulation suitable for continuous operation at 1500 rpm 230/ 415 Volts 0.8 to 1 pf (lag), 50Hz 3 phase 4 wire system conforming to BS 5000/ IS 4722, Brushless type screen protected revolving field, self excited, self regulated, (+-) 1.0 % Voltage Regulation (Max) in static conditions, Permissible overload 10% for one hour in 12 hrs operations. C). CONTROLLER : The genset control panel is manufactured with 3.15mm CRCA sheet and powder coated for a weather proof, long last finish. Control panel consist of following parts:- (i) Microprocessor based Engine Instrumentation. (ii) Graphical LCD display (iii) Individual phase current (Amps) (iv) Phase voltage (V) (v) Frequency (Hz) (vi) Lube oil pressure (kPa) (vii) Working hours (viii) MCB of suitable rating (ix) LED indication for main failure (x) Suitable current transformers (xi) Integrable with AMF D). Lube oil change period 500 hrs E). Sound proof canopy as per CPCB Norms-IV with inbuilt silencer F). Base Frame in MS iron material | ||
| 3 | G). AUTO MAIN FAILURE PANEL : (i) Line Volage Monitoring - 01 No (ii) 100 Amps ATS Switch - 01 No (iii) 240V AC Control Contactor - 02 No (iv) 12V Battery Charger - 01 No (v) Auto/ Manual Switch - 01 No (vi) 12V Relay - 02 No (vii) 220V AC Indicating Lamp - 02 No (viii) 6 Amps IP MCB for DC Control - 01 No (ix) 25 Sqmm Power wire - 01 No (x) 100Amps 4 way terminal - 03 No H). Drawing for foundation as recommended by manufacturer of DG Set and Panel to be produced to Engr-in-charge | ||
| 4 | Supply and laying 70 SQMM 3.5 Core LT UG cable, 1100 volts grade, XLPE insulated and sheathed, armoured, multistranded, heavy duty electric cable with aluminium conductor laid in trenches, ducts, on poles, walls, through pipes etc including identification tags over on cable complete including cable glands on both side terminations where necessary complete all as specified and directed by Engr-in-Charge. | 95.00 | RM |
| 5 | Excavation in trenches not exc. 1.5 m wide and not exc.1.5 m deep for laying of cable, pipe and for erecting of steel tubular swaged pole etc, and getting out in hard/dense soil complete all as directed by Engg-in-charge. | 18.00 | Cum |
6 Days Left