Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4244583 |
|---|---|
| Organisation Name | Urban Improvement Trust |
| Tender Brief | Restrengthening Of 60ft Master Plan Road Kh.no. 235, 236 To 240, 300 To 309 Garib Nawaz Choraha To Asirwad Nagar Chorha Roopsagar Road Revenue Village Ayad. 1003 |
| Last Date For Submission | 26th May, 2026 |
| Opening Date | 27 May, 2026 |
| Document Cost | 1180.00 |
|---|---|
| EMD | 106760.00 |
| Estimated Cost | 5338000.00 |
| City | Udaipur |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Item Code [2025 16.14.1]:Item Type [road] :: Providingand laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @ 4.0 & 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with ahydro static paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers toachieve the desired compaction as per MoRTH Specifications Clause505 complete in all respects. Bitumen (VG-30) Grading - I (37.50mm (Nominal Size) | 391.88 | CUM |
| 2 | Item Code [2025 17.30]:Item Type [road] :: Raised Pavement Marker (Cat s Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS moulded body and polycarbonate reflective panels with micro-prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35,000 kilogram tested in accordance to ASTM D 4280 & ASTM D 788. The height of road stud is 20 mm, width 100 mm, length 100 mm and minimum reflective area of 13 sqcm on each side. The strength of detachment of the integrated cylinder shank not less than 14 +/- 2 mm (thickness) and height not less than 30 + 2 mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive | 315.00 | Each |
| 3 | Item Code [2025 5.1]:Item Type [road] ::Prime Coat Sub Item Code [2025 5.1 + (i)]: Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502 | 1650.00 | Sqm |
| 4 | Item Code [2025 5.3 ii]:Item Type [road] :: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500-7 premixed with bituminous binder ,transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade ,level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504. | 82.50 | CUM |
| 5 | Item Code [PWD BSR 2025 16.15]:Item Type [road] :: Sub Item Code [PWD BSR 2025 16.15 + 16.15.2]: Providing and laying bituminous concretewith 100-120 TPH batch typehotmix plant producing an average output of 75 tonnes per hourusing crushed aggregates of specified grading, premixed with bituminous binder minimum @ 5.2 & 5.4 percent of mixand filler, transporting the hotmix to work site, laying with ahydro static paver finisher with sensor control to therequired grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects for Grading-I ( 19 mm nominal size ) Bitumen (VG-30 | 182.88 | CUM |
14 Days Left