Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4778877 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Corrigendum : Providing, Fitting, Installation, Testing And Commissioning Of 20000 Gph X 10-13 Meter Head Submersible Mono Bloc At Channi Mansar Stage-0, Impregnation / Repair / Rewinding Of 50 Hp Motor Alongwith Allied Works At Pumping Station Channi Mansar Stage |
| Last Date For Submission | 9th Jul, 2026 |
| Opening Date | 10 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 16000.00 |
| Estimated Cost | 800000.00 |
| City | Udhampur |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing, fitting, installation, testing and commissioning of 20000 GPH x 10-13 meter head submersible mono bloc at Channi Mansar stage-0 | ||
| 2 | Providing, fitting, installation, testing and commissioning of 20000 GPH x 10-13 MH mono submersible at pumping station Channi Mansar stage 0 new with following specifications:- Pump of genuine make with latest ISI standards) Discharge-20000 GPH Head- 10-13 meter head RPM-2900 Job includes shifting of mono submersible pump set with allied accessories to pumping station. Providing, fabrication, and fitting of suction pipe line 100mm dia approximately upto 10 meters in length with proper laying, flanging and welding from delivery end of submersible pump set using adapter as per size of pump set upto suction pipe line of HC pumping unit. Providing, fitting and laying of 6mm2 submersible copper cable 3 core from panel installed at pump room upto submersible pump set approximately 50 meters in length with proper thimbling and insulation material and thereafter testing the system. Job also includes providing and fitting of MUG starter of suitable rating to run the system. Complete job includes cost of material, labour charges, hire charges of tools and tackles, transportation etc. | 1 | job |
| 3 | Impregnation / repair / rewinding of 50 HP motor alongwith allied works at pumping station Channi Mansar stage-0 | ||
| 4 | Repair to 50 hp motor burnt at pumping station Channi Mansar stage-0 by way of decoupling of motor from pump, dismantling of motor. Extraction of rotor and side covers from stator and then shifting upto the workshop, repair to rotor shaft by welding, turning and finishing for exact bearing size making keyways. Fabrication and fitting of sleeves to side covers of motor, welding and patching to side covers. Providing and fitting of bearings by replacing damaged bearings. job also includes Complete rewinding of 50 HP high speed motor and then shifting the same back upto the pumping station. Assembling complete motor coupling with pump making proper alignment and then testing at site. Complete job includes cost of material, shifting / transportation loading / unloading and labour charges. | 1 | job |
| 5 | Repair of 100 KVA and 63 KVA voltage stabilizer alongwith filling of T-oil Channi Mansar stage-0, |
2 Days Left