Complete Tender Details

Empowering Indian businesses in the procurement ecosystem since 2012

Tendering Authority: Military Engineer Services
Tender ID3883735
Organisation NameMilitary Engineer Services
Tender BriefCorrigendum : Provision Of Certain Minor Works At Various Locations In The Aor Of E/s And Rac Sub Div Under Ge (utilities) Udhampur
Last Date For Submission27th Apr, 2026
Opening Date29 Apr, 2026
Cost
Document Cost500.00
EMD46681.00
Estimated Cost2334060.00
Location
CityUdhampur
StateJammu and Kashmir

Register to see full details

BOQ Items
#ItemQtyUnits
1Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 Sqmm nominal cross section in service connections:- (Note : Excavation, earthwork, Pipe for cable protection to be measured and paid for separately), complete all as specified and directed by Engineer-in-Charge.
2(a) 6 Sqmm 3 Core100.00RM
3S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 4.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25 mm dia medium grade fittings including 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly, complete all as specified and directed by Engineer-in-Charge.600.00RM
4M & L for providing earthing with GI earth plate electrode 600 X 600 X 6mm buried directly in ground (earth pit not less than 2.25M deep below ground level ) with top edge of the earth plate not less than 1.5M below ground level connected to GI strip 25 x 4 mm thick for earthing lead fixed by means of nuts,bolt,washers etc connected to earth test point complete all as specified in electrical plate NO 3 of SSR1996 part 1 ,including necessary excavation and earth work in any strata of soil,comman salt, charcoal dust, 40 mm dia light grade GI pipe for protection to earth lead, GI water pipe 20mm dia with funnel &wire mesh , PCC pit with CI cover and frame etc all as specified and directed by Engineer-in-charge. Note:- All the joints shall be made with welding to get proper conductivity.On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost, complete all as specified and directed by Engineer-in-Charge. Note:- The Contractor shall fix the Earth Pit Chamber Board of 3.15 mm thick mild steel sheet of size min 45 cm X 30 cm fixed with 12 mm thick MS rod two nos up to 90 cm Height by nut/bolts including spray painting with two coats of synthetic Enamel Black Paint complete MS Sheet both side including writing letters min 6 cm height i.e. Earth Pit No. , Location, Earthing test value and date and other letters, complete all as specified and directed by Engineer-in-Charge.1.00Each
5S&F of LED bollard warm white with robust design and efficient garden lights of 9/10 watt capacity, IP65 protection and flared/trumpet-shaped diffuser head for uniform light distribution with minimum height oflight should be 800 mm from base including internal wiring, terminal connectors, mounting flange and hardware, complete all as specified and directed by Engineer-in-Charge. Make:- Crompton Cat No LBLSN-10-WW or equivalent make in PS. Note:-Each light shall be marked or embossed as GE (U) Udhampur with CA No.35.00Each
27th Apr, 2026

6 Days Left

WhatsApp