Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4275741 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair/maint Of Pumping System, Pipe Lines And Valves At Asc Bde, 31 Rr, Engr Regt, Krimchi Complex And Maint Of Distribution Header, Sluice Valve, Non Return Valve, Air Release Valve And Allied Works At Various Locations Under Ge (utilities) Udhampu |
| Last Date For Submission | 10th Jun, 2026 |
| Opening Date | 12 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 96000.00 |
| Estimated Cost | 4800000.00 |
| City | Udhampur |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for dismantling of Inlet and outlet connections from existing old header including Sluice valves , NRVs, complete all as specified and directed by Engineer-in-Charge. | 2.00 | Each Job |
| 2 | Fixing only sluice valve with flanged ends, any pattern of size 150mm dia obtained from Item No 01 complete all as specified and directed by Engineer-in-Charge. | 1.00 | Each |
| 3 | Description all as per Ser Item No 2.00 here-in-before, but size of dia 100 mm | 1.00 | Each |
| 4 | Supply and fixing MS ERW pipe of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (01 x 150 mm/1x 80mm) ,flow side and 03 outlets from distribution side (02x 80mm,1 x50mm)suitable to MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 1.00 | Each Job |
| 5 | Supply and fixing MS ERW pipe of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (2x 150 mm ) from pump side and 03 outlets from distribution side ( 01 x 150mm, 01 x 100mm, 02 x80 mm, dia MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. | 2.00 | Each job |
6 Days Left