Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4382725 |
|---|---|
| Organisation Name | The Fertilisers And Chemicals Travancore Limited |
| Tender Brief | Corrigendum : Installation Of New Fenestrations (door, Window And Ventilator) At Fact Cochin Division, Ambalamedu, Kochi, As Per Tender Conditions. |
| Last Date For Submission | 17th Jun, 2026 |
| Opening Date | 18 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 25000.00 |
| Estimated Cost | 0.00 |
| City | UDYOGAMANDAL |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Demolishing brick work manually/ by mechanical means, at all heights, including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | 20.00 | M3 |
| 2 | Dismantling steel/ wooden frame of doors, windows and ventilator including shutter, chowkhats, architrave, holdfasts etc. from all heights complete and stacking within 50 metres lead. | 10.00 | M2 |
| 3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 10.00 | M3 |
| 4 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | 50.00 | M3 |
| 5 | Providing and fixing factory made uPVC half glazed door, of Rehau/ Fenesta/ Veka make, at all levels made out of all fittings and fixing at site and sealing of gaps as per the designs & specifications narrated below and as per direction of Engineer-in-charge, all complete comprising of the following: uPVC multi-chambered extruded profiles, comprising frame, mullion and sash (nos as per requirement), all having minimum wall thickness 2.2 mm +/- 0.5mm and galzing bead of appropriate dimension; Glass: 6 mm toughened glass with make of Saint Gobin or equivalent; GI Reinforcement: All the profile sections should be reinforced with GI sheet of 2.5mm +/- 0.5 mm thickness (shape & size according to uPVC profile). The reinforcement must have cleared a 20 days Salty Spray Test as per ASTM-B-117 guidelines from any testing agency as decided by Engineer-in-charge; Installation: The door must be aligned in plumb and water level and installed to the sill using high quality steel fasteners (stainless steel (SS-304 grade)). This item shall also include providing and fixing Pre laminated (both sides) fibre board of grade -1 MDF of18mm thickness conforming to IS 14587 with necesssary arrangements like screws and edge sealants. The outer frame and sill must be sealed with proper sealants by a skilled contractor and all accessories necessary for the fittings like EPDM gasket, SS fasteners etc. shall be brought by the contractor. Installation must carry a manufacturing warranty for a period of 10 years against manufacturing defects and 15 years for leak proof installation. Profile of frame, mullion and sash shall be conforming to technical specifications as mentioned in doc no: 32687-12-DA-009. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing or as per direction of Engineer-In-Charge. Installations shall also include fixing handles/hooks/door closers for smooth operation and cutting and re-doing plastering work, as necessary on site as per direction of Engineer-In-Charge; All complete in the pattern and dimensions as per architectural drawings and as per direction of Engineer-in charge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Minimum profile width shall be 50mm. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. | 20.00 | M2 |
1 Days Left