| 1 | SH I: DIGITAL AUDIO SYSTEM:- Supply, installation, testing, and commissioning of Active wall mount Loudspeaker with 2-way, 12" powered full-range loudspeaker delivering up to 2,000 W peak Class-D amplification with integrated DSP, offering 60 Hz 20 kHz ( 10 dB) frequency response and 130 dB or better SPL. It should have minimum 70 H x 70 V dispersion pattern. It should have 12" LF driver and 1.2" HF compression driver and two combo XLR-1/4" mic/line inputs with switchable sensitivity, 1 x XLR mix out etc complete as required with five year warranty including petty purchase to complete the job in all respect to the best satisfcation of the department. | 8.00 | Nos |
| 2 | Supply, installation, testing, and commissioning of front-loaded 18" powered subwoofer delivering up to 3,000 W Class-D peak amplification with integrated DSP, offering a 45 Hz 98 Hz ( 6 dB) response and up to 132 dB SPL, driven by a high-excursion 18" LF driver with a 4" voice coil and double suspension. It features 2x combo XLR- " inputs with balanced XLR link outputs, and Neutrik powerCON input/link power connections, plus a user-friendly LCD interface with rotary encoder for level, EQ and presets, the birch plywood enclosure etc complete as required with five year warranty including petty purchase to complete the job in all respect to the best satisfcation of the department. | 3.00 | Nos |
| 3 | Supply, installation, testing, and commissioning of Active two-way stage monitor loudspeaker with 2-way full range Active loudspeaker with 1 x 12" LF driver, 1 x 1" HF driver or better. It should have Power rating of 1000 Watts Peak or better. The speaker should have Frequency Response of 50 Hz 18 kHz or better. It should have Dispersion of 70 90 x 50 60 or better. The speaker should have Maximum Peak SPL of 126 dB or better. It should be made up of Injection-moulded polypropylene enclosure with multiple rigging points etc complete as required with five year warranty including petty purchase to complete the job in all respect to the best satisfcation of the department. | 2.00 | Nos |
| 4 | Supply, installation, testing, and commissioning of Active Green Room & Control Room Speakers with 2-way, bi-amplified powered nearfield reference monitor featuring a 5" custom high-efficiency woofer and a 1" soft-dome tweeter driven by a 75 W total bi-amp module with active crossover for clear, accurate sound reproduction. It delivers a 49 Hz 20 kHz frequency response and up to 108 dB Peak SPL etc complete as required with five year warranty including petty purchase to complete the job in all respect to the best satisfcation of the department. | 6.00 | Nos |
| 5 | Supply, installation, testing, and commissioning of Digital Signal Processor with minimum 10 input and 4 output, all Inputs shall have AEC feature, minimum 8 GPIO Ports or more for logic controls, 64x64 bi-directional channels of audio over Dante, 1 USB port for connectivity with Software based Video Conferencing system (within the system without any external device), THD+N (22Hz to 22kHz) : 0.002% or better (1kHz @ +4dBu), Dynamic Range : 110dB or better, Propagation Delay : 4ms or better, CMRR, >75dB ,Sampling Rate : 48kHz or 96 kHz, A/D-D/A Converters : 24/32-bit or better, Operating temperature : at least 0-40 or better, Processor Type : 40-bit floating point or better, Phantom Power : +48VDC, LED indicators at front of device, Controls, Service & Indicators Up/Select/Down buttons or through TCP IP Ethernet port . Recessed IP reset. Factory service micro-USB/RS232/RS485. The programming should be open architecture. The device should be 19" rack mountable, with no more than 1U. Compliances : CE, FCC, RoHS, REACH etc complete as requried. (Makes: QSC/ Solvision/ Biamp/Klark Teknik) | 1.00 | Nos |
