Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4131399 |
|---|---|
| Organisation Name | Defence Research And Development Organisation |
| Tender Brief | Corrigendum : Provisioning Of Ten New Split Acs For Jsb-i At Drdl Project Cell Ins Kalinga. |
| Last Date For Submission | 26th May, 2026 |
| Opening Date | 28 May, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 12830.00 |
| Estimated Cost | 641500.00 |
| City | Visakhapatnam |
|---|---|
| State | Andhra Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature) Make:- Voltas/BlueStar/Daikin. | ||
| 2 | 1.5 TR with 5 Star BEE Rating. | 10 | Each |
| 3 | Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : | ||
| 4 | i) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm. | 15 | Mtrs |
| 5 | ii) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm. | 10 | Mtrs |
5 Days Left