| 1 | Supply, installation, testing and commissioning of centrifugal type, electrically driven pumping set having discharge capacity of 90 litres per second against a total head of 30 metres, CI impeller complete with 50 HP squirrel-cage induction TEFC IE-2 NFLP motor, gland packing type sealing arrangement suitable for 415 volts, 3-phase, 50 Hz AC supply, including coupling, common MS base plate, foundation bolts, nuts and washers, alignment of pump and motor, grouting, vibration control arrangement, making all mechanical and electrical connections, complete with RCC foundation as per OEM recommendation shuttering if required, curing and finishing, complete with trial run, testing to full load conditions, and commissioning to the entire satisfaction of Engineer-in-Charge including Dismantling of existing electric/ diesel driven old unserviceable pump set from its installed position, including disconnection of electrical wiring, suction and delivery pipe connections, removal of foundation bolts, lifting, handling and transportation and handing over the dismantled pump set to the MES store yard, complete all as specified and as directed by Engineer-in-Charge. | 2.00 | Each |
| 2 | Supply, installation, testing, and commissioning of electric-driven vertical turbine pump with bronze impeller, TEFC IE2 Solid shaft NFLP IP55 Motor 40 HP, gland packing type sealing arrangement suitable for 3-phase, 415 V, 50 Hz motor, 30 m head, 70,000 GPH discharge, self water lubrication type pump, including ERW heavy duty column pipes, bowl assembly, shafting, thrust bearings, suction strainer, alignment, coupling, common MS base plate, foundation bolts, nuts and washers, alignment of pump and motor, grouting, vibration control arrangement, making all mechanical and electrical connections, complete with PCC foundation as per OEM recommendation shuttering if required, curing and finishing, complete with trial run, testing to full load conditions, and commissioning to the entire satisfaction of Engineer-in-Charge, including Dismantling of existing electric/ diesel driven old unserviceable pump set from its installed position including disconnection of electrical wiring, suction and delivery pipe connections, removal of foundation bolts, lifting, handling and transportation and handing over the dismantled pump set to the MES store yard, complete all as specified and as directed by Engineer-in-Charge. | 4.00 | Each |
| 3 | Supply, installation, testing and commissioning of radiator-cooled diesel engine driven horizontal split-casing multistage centrifugal pump having CI casing, CI impeller and CI shaft, suitable for discharge of 90 litres per second against a total head of 70 metres, complete with gland packing type sealing arrangement, suitable diesel engine confirming to latest CPCB norms with radiator cooling system including coolant, fuel tank of adequate capacity with complete fuel system, starting system with battery and battery charger, engine control panel with indications, protections, alarms and safety shutdowns, common base frame with flexible coupling and proper alignment, vibration isolation arrangement, priming arrangement, initial lubrication, and all accessories required for satisfactory operation, including design and construction of RCC foundation as per OEM recommendations with shuttering if required, curing and finishing, complete in all respects, including trial run, testing up to full load conditions and commissioning, to the entire satisfaction of the Engineer-in-Charge including Dismantling of existing electric/ diesel driven old unserviceable pump set from its installed position, including disconnection of electrical wiring, suction and delivery pipe connections, removal of foundation bolts, lifting, handling and transportation and handing over the dismantled pump set to the MES store yard, complete all as specified and as directed by Engineer-in-Charge. | 1.00 | Each |
| 4 | Supply, laying in trenches or fixing on wall or passing through pipe or in cable ducts, XLPE insulated PVC screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of 3.5 core 50 sqmm size cable complete all as specified and as directed by Engineer-in-Charge. | 60.00 | Rm |
| 5 | Supply, laying in trenches or fixing on wall or passing through pipe or in cable ducts, XLPE insulated PVC screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of 3.5 core 70 sqmm size cable complete all as specified and as directed by Engineer-in-Charge. | 30.00 | Rm |
