Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4132267 |
|---|---|
| Organisation Name | Mathura Vrindavan Development Authority |
| Tender Brief | Corrigendum : Work No. 23 Rukmani Vihar Awasiya Yojna Vrindavan Me 01bhk, Lig, Ews Evam Studio Bhavno Ke Aantrik Marammat Ka Karya |
| Last Date For Submission | 13th May, 2026 |
| Opening Date | 14 May, 2026 |
| Document Cost | 2360.00 |
|---|---|
| EMD | 336000.00 |
| Estimated Cost | 6729000.00 |
| City | Vrindavan |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. With cement mortar 1:4 (1cement: 4 coarse sand). DSR 2023 I.NO 14.1.2 | 3281.00 | Sqm |
| 2 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 12 mm average thickness. DSR 2023 I.NO 26.32.1 | 3281.00 | Sqm |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 2023 I.NO 9.21.2 | 94.00 | Sqm |
| 4 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm DSR 2023 I.NO 9.100.1 | 88.00 | No |
| 5 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm DSR 2023 I.NO 9.96.2 | 44.00 | No |
3 Days Left